Pillow Block Bearings

Contact Now

Pillow blocks are supplied in a variety of configurations. Pressed steel pillow block bearings are also available for light-duty applications. Check out our selection of high quality pillow block bearings listed below. We are always updating and adding sizes and styles. So be sure to refer to this page often. A pillow block bearing consists of a mounting bracket (pillow block) that houses a bearing and is used in low-torque, light load applications. With this configuration, the pillow block is bolted to a foundation, securing it, while the shaft and the inner ring of the bearing are free to rotate.

 

 


A Pillow Block Bearing is a mounted anti-friction bearing that is contained within a solid cast iron, ductile iron or cast steel housing unit. Also referred to as a housed bearing unit, meaning they are self-contained, greased, sealed and ready for installation on the equipment.

 

 

 

 

 

4.921 Inch | 125 Millimeter x 3.74 Inch | 95 Millimeter x 6.378 Inch | 162 Millimeter TIMKEN LSM125BRHSNQATL Pillow Block Bearings

4300 3.50 KGS
355 Standard

4.724 Inch | 120 Millimeter x 3.74 Inch | 95 Millimeter x 6.378 Inch | 162 Millimeter TIMKEN LSM120BXHSNQATL Pillow Block Bearings

37 mm G 30x37x4
0.03 kg 4.65 kN

4.724 Inch | 120 Millimeter x 3.74 Inch | 95 Millimeter x 6.378 Inch | 162 Millimeter TIMKEN LSM120BXHSATL Pillow Block Bearings

Steel 1.66
11000 0.02 KGS

1.181 Inch | 30 Millimeter x 2.165 Inch | 55 Millimeter x 2.362 Inch | 60 Millimeter TIMKEN LSM30BRHSATL Pillow Block Bearings

17000 rpm 0.64 mm
30000 rpm 24000 rpm
1/12