Angular Contact Ball Bearings

Contact Now

Angular-contact ball bearings are similar to deep-groove ball bearings except that the line of action of the load acting through the contacts between balls and raceways forms an angle with the bearing axis. The bearings are therefore particularly suitable for carrying combined (axial and radial) loads.Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

 

 

 

Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.The load lines of the angular contact bearings back to back are separated from the bearing shaft.It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.

 

 

 


 

1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter NSK 5208-2RSTNC3 Angular Contact Ball Bearings

2.00 in 0.0024 in
1400 rpm 0.23

1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 1.063 Inch | 27 Millimeter NSK 5207ZZTNC3 Angular Contact Ball Bearings

14,8 0,6 Kg
57 mm 116 kN

FAG 3203-BD-TVH-L285 Angular Contact Ball Bearings

B49-7 NSK
87 mm 49 mm

FAG 3203-BD-2Z-TVH-C3 Angular Contact Ball Bearings

100 mm 100
1,35 mm 195 kN

FAG 7356-B-MP-UA Angular Contact Ball Bearings

20 25,5 mm
25 ° 20 mm

FAG 7348-B-MP-UA Angular Contact Ball Bearings

158,75 mm Timken
101,6 mm 49,15 mm

FAG 7344-B-MP-UA Angular Contact Ball Bearings

160 mm 5 7/16 in
999999999 550.00 mm

FAG 7340-B-MP-UA Angular Contact Ball Bearings

53 mm 6000
NSK 45
1/11