SMITH DCR-1 Cam Follower and Track Roller - Stud Type

Basic Static Radial Load Rating Co:36500 N; B:27.00 mm; Oil Speed Rating n2:8000 rpm; Grease Speed Rating n1:6000 rpm; Basic Dynamic Radial Load Rating C:39100 N; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6000 rpm; d:35.000 mm; D:72.0000 mm;

B:49.00 mm; Accessories:Two Shields & Snap-R; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; Basic Static Radial Load Rating Co:232000 N; d:105.000 mm; Basic Dynamic Radial Load Rating C:205000 N; Oil Speed Rating Open/Shielded n2:2900 rpm; D:225.0000 mm;

Accessories:Seal & Snap-Ring; Oil Speed Rating Open/Shielded n2:5300 rpm; Grease Speed Rating Open/Shielded n1:4500 rpm; D:145.0000 mm; d:95.000 mm; Basic Dynamic Radial Load Rating C:63700 N; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:54000 N; B:24.00 mm; Fillet Radius ra:1

B:130 mm; D:280 mm; Basic static load rating C0:1060 kN; d1 ≈:174 mm; C:128 mm; Maximum dynamic radial loads Fr max.:900 kN; K:6; Mass bearing:48.2 kg; D1 ≈:176 mm; d:110 mm;

Grease Speed Rating Open/Shielded n1:2100 rpm; D:265.0000 mm; d:100.000 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; B:60.00 mm; Basic Static Radial Load Rating Co:300000 N; Basic Dynamic Radial Load Rating C:251000 N; Fillet Radius ra:3.00 mm; Accessories:Without Accessories;

P120°:1400 kN; Mass housing:138 kg; L:640 mm; Cap bolt, size:M 24x160; H:434 mm; Adapter sleeve:OH 3144 HTL; A1:240 mm; da:200 mm; P150°:1300 kN; End cover:ETS 3144 R;

J max.:368.3 mm; h:55.563 mm; RG:1/2 NPT; R2:30.163 mm; Bearing:1320 K; J1:69.85 mm; Da:215.001 mm; Labyrinth ring:2 x LOR 100; H1:133.35 mm; Stabilizing ring:2 x SR-1620;

B1:3 mm; B:20 mm; Tolerance housing:H7; D1:26 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.026 kg; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05;

Basic Dynamic Radial Load Rating:4380 lbf; Insert Bearing IB:ZMaRC; Distance J:1.8750 in; Width A:1.0625 in; Shaft Diameter D:1 1/8 in; Dimension F:0.5000 in; Weight W:1.10 lb; Dimension C:2.0625 in; Dimension B:5.4375 in; Distance H:1.250 in;

B:335 mm; da min.:778 mm; Limiting speed:40 r/min; Da max.:1062 mm; d2 ≈:856 mm; Reference speed:20 r/min; K:15 mm; D:1090 mm; b:72.8 mm; Calculation factor Y2:3.4;

H:398.462 mm; h:61.913 mm; Initial grease fill:1672.65 g; A2:276.225 mm; ba:78.581 mm; RG:1 NPT; Housing:SAFS 538; End plug (suffix Y):EPR 21; Labyrinth ring:2 x LOR 156; P150°:136 kN;

r1,2 min.:4 mm; Mass bearing:75 kg; Reference speed:260 r/min; Basic dynamic load rating C:2080 kN; D:520 mm; B:33.5 mm; Limiting speed:500 r/min; Basic static load rating C0:10000 kN; H:112 mm; ra max.:3 mm;

Cap bolt:2 x 3/4-10 UNC; P90°:81.4 kN; Adapter sleeve assembly:SNW 3024x4.1/4; da:107.95 mm; P60°:136 kN; Initial grease fill:181.44 g; N1:25.4 mm; Bearing limiting speed:4000 r/min; A2:155.575 mm; P120°:50.7 kN;

G:M 52x3; dk:80 mm; α:6 °; B:44 mm; l7 min.:70 mm; w:70 mm; Mass rod end:6.3 kg; C1 max.:39 mm; h1:175 mm; d4 ≈:82 mm;

Hexagonal key size for grub screw N:3.175 mm; Housing material:Composite for food a; A5:22 mm; Limiting speed:4300 r/min; Basic static load rating C0:7.8 kN; Thread grub screw G2:1/4-28 UNF; Housing:SYFWK 505 L; Recommended tightening torque for grub screw:4 N·m; L:76 mm; B:34.1 mm;