Angular Contact Ball Bearings

Contact Now

Angular-contact ball bearings are similar to deep-groove ball bearings except that the line of action of the load acting through the contacts between balls and raceways forms an angle with the bearing axis. The bearings are therefore particularly suitable for carrying combined (axial and radial) loads.Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

Angular Contact. Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions.The load lines of the angular contact bearings back to back are separated from the bearing shaft.It can withstand axial loads acting in both directions, but the load in each direction can only be absorbed by one bearing. Back-to-back mounted bearings provide a relatively rigid bearing configuration and can withstand overturning moments.

Bearing Number	Bore Dia	Outer DIa	Width	Size
1.969 Inch \| 50 Millimeter x 3.543 Inch \| 90 Millimeter x 1.189 Inch \| 30.2 Millimeter NTN 5210NRC3 Angular Contact Ball Bearings	63.8 mm	Industrial	Shroud Seal	Ball Bearing
1.969 Inch \| 50 Millimeter x 3.543 Inch \| 90 Millimeter x 1.189 Inch \| 30.2 Millimeter NTN 5210CZZ Angular Contact Ball Bearings	220 mm	CRI-4409	158	340 mm
1.969 Inch \| 50 Millimeter x 3.543 Inch \| 90 Millimeter x 1.189 Inch \| 30.2 Millimeter NTN 5210CLLU Angular Contact Ball Bearings	15.512 in	26.4 in	2341 lb	700 rpm
1.969 Inch \| 50 Millimeter x 3.543 Inch \| 90 Millimeter x 1.189 Inch \| 30.2 Millimeter NTN 5210CZ Angular Contact Ball Bearings	80 mm	130 mm	130	200 mm
0.669 Inch \| 17 Millimeter x 1.85 Inch \| 47 Millimeter x 0.874 Inch \| 22.2 Millimeter NTN 5303C3 Angular Contact Ball Bearings	0,172 Kg	98 mm	98	90
0.591 Inch \| 15 Millimeter x 1.654 Inch \| 42 Millimeter x 0.748 Inch \| 19 Millimeter NTN 5302CZZ Angular Contact Ball Bearings	230	0.591 Inch \| 15 Millimeter x 1.654 Inch \| 42 Millimeter x 0.748 Inch \| 19 Millimeter	156 mm	552 kN
0.591 Inch \| 15 Millimeter x 1.654 Inch \| 42 Millimeter x 0.748 Inch \| 19 Millimeter NTN 5302C3 Angular Contact Ball Bearings	360	200 mm	360 mm	23240 CW33
1.969 Inch \| 50 Millimeter x 4.331 Inch \| 110 Millimeter x 1.748 Inch \| 44.4 Millimeter NTN 3310NRC3 Angular Contact Ball Bearings	60	130 mm	54	95 kN
1.969 Inch \| 50 Millimeter x 4.331 Inch \| 110 Millimeter x 1.748 Inch \| 44.4 Millimeter NTN 3310C3 Angular Contact Ball Bearings	44500 lbf / Static l	3 inch	74000 N / Dynamic lo	N/A
1.969 Inch \| 50 Millimeter x 4.331 Inch \| 110 Millimeter x 1.748 Inch \| 44.4 Millimeter NTN 3310 Angular Contact Ball Bearings	235 mm	420	200 mm	CRD-4020
1.772 Inch \| 45 Millimeter x 3.937 Inch \| 100 Millimeter x 1.563 Inch \| 39.69 Millimeter NTN 3309NR Angular Contact Ball Bearings	320 mm	1.772 Inch \| 45 Millimeter x 3.937 Inch \| 100 Millimeter x 1.563 Inch \| 39.69 Millimeter	160 mm	410 1/min / Referenc
1.772 Inch \| 45 Millimeter x 3.937 Inch \| 100 Millimeter x 1.563 Inch \| 39.7 Millimeter NTN 3309C3 Angular Contact Ball Bearings	12	0.43 Hz	1.47 kN	17 °